OJ Electronics AHC-3000 Instructions Manual

30, © 2018 OJ Electronics A/S 30 INSTRUCTIONS Commissioning guide for AHC-3000 18.4 Commissioning the cooler Cooler status/readouts: Settings: Override On/O Status: Current cooling % Current 0-10V output cooling coil Current supply air temp. (°C/°F) Cooler override: Activate the …

44, © 2018 OJ Electronics A/S 44 INSTRUCTIONS Commissioning guide for AHC-3000 20.4 Cooling coil settings (water cooling coil) Available settings Setpoint √ Current setpoint for the current temperature control mode √ Setting range: 0.0–40.0°C Current √ Curren…

34, © 2018 OJ Electronics A/S 34 INSTRUCTIONS Commissioning guide for AHC-3000 19.2 Fan control mode: Constant air flow • Select the fan control mode: Constant air flow – the procedure is the same for the supply and exhaust air fans. • Set the control parameters for th…

51, © 2018 OJ Electronics A/S 51 INSTRUCTIONS Commissioning guide for AHC-3000 21.3 Setting standard daily operation pattern For setting the operating pattern that will be in eect as the standard operating pattern during those periods in which the system is to run in normal operation. Selec…

10, © 2018 OJ Electronics A/S 10 INSTRUCTIONS Commissioning guide for AHC-3000 10. Update SW and read out the current SW version To read out the SW version for the AHC-3000 and the connected HMI-35T Updating the SW To update the SW in the AHC-3000 and in the HMI-35T hand-held terminal,…

14, OJ Electronics AHC-3000 © 2018 OJ Electronics A/S 14 INSTRUCTIONS Commissioning guide for AHC-3000 13.5 Bluetooth To use Bluetooth, you must use the AHC-3000-B. The Bluetooth must be activated before use. After activating Bluetooth in the AHC-3000-B, you may start a scan from your Bluetooth device (smartphone, t…