Telematrix 9602IPMWD Operation & User’s Manual

8, Vo lume+ Conversation Increase the receiver volum e Stand-by Increase the ringer volum e Vo lume- Conversation Decrease the receiver volum e Stand-by Decrease the ringer volume Line1 Stand-by Line1 state (only for two-line model) Line2 Stand-by Line2 state (only for …

6, Call Function NAT Traversal  Call Hold  Call Waiting  Call forward  Caller ID  STUN Confi guration  W eb Browser  Keypad DTMF Fir mware Upgrade  IN Band  RFC2833  SIP Info  TFTP  HTTP  FTP  HTTPS …

7, 2 PHONE MENU SETTINGS Using the web configuration page: fam iliar with the PC user can use the method to configure the phone. Sequentially press the "**47#" button, then the phone will voice broadcast address IP. Directly in the browser address bar entering the address of…

29, Server Port Set the port # of syslog server. The default is 49494. defau lt The default of logintelval is 0. Even ts only Log information print interval is 1min. Even ts plus periodic status Logint is the setting range of lower interval. int eval Log interval time setting…

15, Telematrix 9602IPMWD Note: if the user wants to access the phone through the WAN port, then he / she must use the new IP address to access the phone after changing IP address of WAN port. 4.2.2 LAN Settings LAN port setting interface 4.2.2.1 LAN Settings LAN Settin gs Link Mode Configure the LAN…

21, Call Feature Program mable Keys&MWI Touchlite Mem 1~Mem10 1. Set the number in speed dial key. 2. Set the second function. Each memory can be arbitrarily set as Hold, DND, Transfer, Conference, Multicast Paging MWI Tou chlite Set the number in shortcut key for voice message pick…