SBM 262 XLA Manual, Technical Instructions

5, 5 3. LIGHTING THE BROODERS 3.1 STANDARD INSTALLATION 3.2 IGNITION IMPORTANT : preheat the building 24 hours before the animals arrive.  Set the G6A-G10A MINI gas regulator to position 1.  Set the G6A-G10A MAXI gas regulator to position 8 (Summer) …

9, 9 For any spare part order, please specify : - brooder type and serial number - type of gas - operating pressure These informations are displayed on the rating plate, attached to each brooder. C B D A E G H I J F N L M J&…

8, 8  After cleaning the brooder, make sure that the brooder (surface of the ceramic plaques, hanging bracket) has not experienced mechanical damage. ONCE A YEAR, PERFORM A VISUAL INSPECTION OF ALL FLEXIBLE GAS HOSES, ESPECIALLY AROUND THE HOSE CLAMPS. 6. GAS CONVERSION The bro…

6, 6 5. MAINTENANCE ONCE A WEEK (or whenever a blue flame appears), CLEAN THE AIR FILTER.  Take out the metal filter  Blow out the metal filter with compressed air  Replace the metal filter in the filter holder Comp…

3, SBM 262 XLA 3 2. INSTALLATION 2.1 RULES AND REGULATIONS  The brooders must be installed in compliance with current local regulations, by a qualified installer.  The brooders must be installed in sufficiently ventilated premises.  The brooders are not authorised for …