Techno TH387 Assembly Instructions Manual

10, TH387 panel-mounted M25 © Techno Srl All rights reserved.10 Fixing nut Clockwise - 1.5 Nm 32 Fixing nut Clockwise - 1.0 Nm 23.3 A B Important In case of circular hole, in order to hold the panel-connector when panel- mounting, you should insert the plug (or socket) connector into the pan…

8, Techno TH387 TH387 panel-mounted M20 (all panels) © Techno Srl All rights reserved.8 Fixing nut Clockwise - 1.5 Nm 23 Code: THx.387.Nxx THx.387.Pxx Panel thickness: 1.0 mm ÷ 9.0 mm Fixing nut Clockwise - 1.0 Nm 19 A B A B 20 19 Important In case of circular hole, in order to hold the panel-c…

7, TH387 panel-mounted M20 (non conductive panel) © Techno Srl All rights reserved. Fixing nut Clockwise - 1.5 Nm 22.4 mm Code: THx.387.Mxx THx.387.Lxx Panel thickness: 1.0 mm ÷ 3.5 mm Important In order to hold the panel- connector when panel- mounting, you should insert the plug (or socke…

2, TH387 screw terminals tightening © Techno Srl All rights reserved.2 Screw tightening THB.387.x2x.x THB.387.x3x.x THB.387.x4x.x max. 0.8 Nm THB.387.x5x.x max. 0.2 Nm Cable cross-section 0.5 mm 2 – 4.0 mm 2 Stranded and solid conductors 0.25 mm 2 – 2.5 mm 2 Stranded and…

3, TH387 cable-to-cable (long cable gland) © Techno Srl All rights reserved.3 Cable gland Clockwise - 2.5 Nm 22 mm Nut Clockwise - 2.5 Nm 22 mm Ferrule Clockwise - 1.0 Nm (until fully seated) Code: THx.387.xxx.LCode: THx.387.xxx.L Matching the connectors • Turn the ferrule clockwise until full…

6, How to use the quick-fix spanner (cont.) © Techno Srl All rights reserved.6 1. Turn the nut (A) of the connector clockwise using the quick-fix spanner 2. Continue to turn it up to the nut will not turn more. You will hear a noise due to friction of the key on the nut 3. At this point you ha…