Sanus DLT1 Instruction Manual

5, 5 Parts and Hardware for STEP 2 5⁄16 x 2 3⁄4 in. Lag Bolts 17 x4 Washers 16 x4 .695 x .350 x.075 in. Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you. .695 x .350 x .075 in. .695 x .350 x.075 in. x4 Fischer UX 10 x 60R Anchor x…

11, 11 3. Remove the wall plate template 14 and insert four anchors (Fischer UX 10 x 60R - included in the Concrete Installation Kit*). CAUTION: Be sure the anchors are seated flush with the concrete surface. 4. Install wall plate 15 using four lag bolts and four washers (use on…

18, 18 AJUSTE DE LA INCLINACIÓN: Afloje la perilla que se encuentra en la placa de sujeción del televisor a fin de ajustar la inclinación de su televisor. Ajuste la perilla cuando su televisor tenga la inclinación deseada. RETIRAR EL TELEVISOR: Jale hacia abajo de las correas, …

1, DLT 1 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/20 …

6, Sanus DLT1 6 STEP 1 Attach Brackets to TV M5 M6 M8 FLAT BACK ROUND BACK CABLESINSET HOLES 1.1 Select TV Screw Diameter 1.2 Select TV Screw Length Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M5, M6, or M8) to use. a b If your TV h…

13, 13 Adjustments Loosen the knob on the TV bracket to adjust the tilt of your TV. Tighten the knob when your TV is set to the desired tilt. TILT Pull down on the straps and lift the TV up and out away from the wall plate. REMOVING THE TV TILT LEVEL If needed, tighten one of the screws on th…