Radi PressureWire Aeris Manual 

16, 16(17) SYMBOLS WITH EXPLANATIONS: Caution, (Attention consult accompanying documents) Consult operating instructions Expiry date (2 years from manufacturing date) Contents of the package REF Catalogue number Lot number. QTY Quantity Type C…

14, 14(17) NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. …

17, 17(17) The transmitter contains silver oxide button type batteries with in total < 2% mercury, allowed to be put on the market according to the battery directive 2006/66/EG. The signal performance requires the batteries to be permanently affixed and the transmitter to be sealed, which,…

5, 5(17) - Take care that the sensor element of PressureWire ® is just submerged but not under a column of liquid (the tray should be lying flat). - Activate the receiver by pressing the CONNECT button. The receiver is now ready to connect to PressureWire ® (during 60 s), indicat…

11, 11(17) TRANSMITTER LIGHT INDICATORS Light indicators Explanation Green steady light Transmitter on Green pulsating light proportional to blood pressure Normal operation Yellow steady light PressureWire® disconnected from transmitter. Re-insert PressureWire® firmly into transmi…

12, Radi PressureWire Aeris 12(17) Immunity test IEC 60601 Test level Compliance level Electromagnetic environment - guidance Electrostatic discharge (ESD) IEC 61000-4-2 ±6 kV contact ±8 kV air ±6 kV contact ±8 kV air Floors should be wood, concrete or ceramic tile. If floors are c…