Packard Bell Compasseo 800 Disassembly Manual

6, Compasseo 800 Disassembly Manual 6 Removing the GPS module (B) Follow these steps to remove the GPS module: 1. Disconnect the GPS cable from the main board. 2. Remove the two screws from the top left and bottom right of the GPS module. 3. Lift the GPS module from the main board. 4. Disconne…

3, Compasseo 800 Disassembly Manual 3 Overview This document contains step-by-step disassembly instructions for the Compasseo 800. The instructions are illustrated where necessary with images of the part of the device that is being removed or disassembled. Packard Bell reserves the right to make chan…

2, Compasseo 800 Disassembly Manual 2 Table of Contents Overview ..................................................................................................................3 Technician Notes...........................................................................................…

7, Compasseo 800 Disassembly Manual 7 Fig. 5 Disconnecting the microphone cable Note When removing the main board from the casing, watch the volume switch, as it might come off. When reassembling, put back the switch first before closing the device. Removing the Bluetooth module (C) (see fig. 3) I…

8, Packard Bell Compasseo 800 Compasseo 800 Disassembly Manual 8 1. Remove the screw that holds the speaker bracket to the main board, at the back of the main board. Fig. 6 Removing the speaker bracket 2. Separate the speaker bracket from the main board. 3. Finally, disconnect the Bluetooth cable and modul…