OPTI Kinetics Solar 250 Manual 

3, OPTI Kinetics Solar 250 2. Mounted on top of a flat surface by using the hanging bracket as an adjustable stand. 3 There are 3 methods of mounting: 1. Suspended from above with it's hanging bracket firmly fixed to a strong beam or Trilite truss. Do 1. Operate in wet conditions or allow liquid to ent…

13, 13 Overall size 340mm long (without lens) x 125mm wide x 81mm deep (225mm deep with hanging bracket). Weight 3.5kg. Standard lens 3 Element 85mm f2.8 42.5mm Helical Focus Groove. Mains voltage 110 - 120V~ or 220 - 240V~ 50/60Hz. Power consumption 115 Watts maximum. 12V~ output current 400mA …

4, 4 Adjusting the Hanging Bracket Solar 250 1. Loosen central knobs on both sides and move the bracket/projector into desired position. 2. Tighten knobs securely. Power The mains supply is supplied via the IEC mains inlet socket at the rear of the unit. An IEC power cable is supplied with e…

5, 5 The Gate The 'gate' of an OPTI Effects Projector is the area between lamp optics and the focussing lens into which the effect(s) to be projected are placed. On both the Solar 250 and 100C the gate is a fixed opening and has two sides with runners on them into which &ap…

7, Effects and Accessories 7 6 minute FG6380 1/2 rpm FG6340 5 rpm FG6350 20 rpm FG6360 VSD 50 min - 5 rpm FG6378SM Wheel Safe 1/2 rpm FG0066 Wheel Safe 5 rpm FG0064 Extension Shaft GS6340E 6” WHEEL ROTATORS Projector + Lens 1 x Custom B/W 50mm Gobo 1 x Slide/Gobo Holder with 1/2rpm Wheel Rotator 6&q…