Qdos Crystal Operation & User’s Manual

14, 14 ONE WAY STOP The One-Way Stop must always be used when the gate is used at the top of stairs to prevent the gate from swinging out over the stairs. It can also be used in any other location where you want to restrict the opening direction. The one-way stop is attached on th…

8, 8 Step 1 Identify the rail with only one hole in it. With the hole towards the bottom, push the Top Lock into the top of the FastMount™ Locking Rail until the plastic tab snaps into place on the back of the rail (Picture A). Push the Bottom Lock into the bottom of the L…

13, 13 Line up the Lower Baseboard Spacer with the lower hole and using one of the Long 3.25” (85 mm) Screws and attach it loosely. Attach the peg in spacer L to the back of the Top Hinge. Using one of the Long 3.25” (85 mm) Screws attach it loosely to the wall. Move the level to the fron…

15, 15 Removal Tool will compress the locking tabs and be held in place. The gate can now be lifted o the hinges. Keep the Removal Tool in a secure place for when needed. …

9, Qdos Crystal 9 IMPORTANT: REGARDING THE INCLUDED MOUNTING SCREWS! Before marking where to attach the gate, make sure you have a solid surface for mounting the gate to. The included screws are intended for the following locations. Directly into wood The Short 2” (50 mm) Screws are used when mount…