MJK 795 Operation & User’s Manual

24, 24 M795GB0503 Data Transmitter 795 SW ver. 830434 Eks.: Data Transmitter ID 001 is supposed to remote control Data Transmitter ID 003: Enter the ID number "003" into Data Transmitter 001. If the receiving unit is another Data Transmitter which is communicating via telepho…

16, 16 M795GB0503 Data Transmitter 795 SW ver. 830434 5.8 F8 - Alarm / Alarm number Menu F8 indicate if the last 9 alarms are ON or OFF: Each time a new alarm is activated, it will be recorded as alarm no. 1 and all other recorded alarms will move down one place and alarm 9 will be deleted. …

36, 36 M795GB0503 Data Transmitter 795 SW ver. 830434 STORM FLOW CALCULATION IN USE: YES: NO: ZERO POINT: LEVEL MEASUREMENT: NO. OF Q(h) POINTS: LEVEL: FLOW: (M 3 /h) HEIGHT VALUE NO. 1: HEIGHT VALUE NO. 2: HEIGHT VALUE NO. 3: HEIGHT VALUE NO. 4: HEIGHT VALUE NO. 5: HEIGHT VALUE NO. 6: HEIGHT VA…

2, 2 M795GB0503 Data Transmitter 795 SW ver. 830434 Konformitätserklärung Wir, MJK Automation A/S, DK-2850 Nærum, erklären in alleiniger Verantwortung, dass das Produkt auf das sich diese Erklärung bezieht mit der/den folgenden Nor me(en) oder normativen Dokument(en) übereinstimmt. EN 50081-…

28, MJK 795 28 M795GB0503 Data Transmitter 795 SW ver. 830434 If these Q(h) values are entered in this menu, the resulting Q(h) curve will be as shown below, and the Data Transmitter will calculate the flow according to this curve: Note, that Q MAX must be no more than 59.999 m 3 / h. 14.2 Storm…