Viewpro X30TM Operation & User’s Manual

10, 2.2 Object tracking Start tracking: Enable tracking function, then single touch on the screen to pick tracking object. Stop tracking：Payload Settings --CANCEL TRACKING *Note: the gimbal will follow the object automatically after object is choen, to control the gimbal …

11, 12V 4S ~ 6S 450mA @ 12V 330mA @ 12V ≤ 5.4W -40 ~ +60 Skyport SD card (Up to 128G, class 10, FAT32 or ex FAT format) DJI Pilot ±90° ±85° ±360° Picth/Roll: ±0.02°, Yaw ±0.03° √ Full HD 1080 (1920*1080) 2.13MP 30x, F=4.3~129mm 12x (360x with optical zoom) 10mm(wide end) to 12…

5, 1.2 Payload Settings: 1.1 Camera settings - Photo mode settings: You can choose single shot, burst mode or interval mode. 3 …

7, Viewpro X30TM OSD Type Options: You can choose to display FOV (Field of View) or Zoom times, GPS co-ordinate of UAV or the object. Hide All: Digital Zoom Options: The EO camera of X30TM has 6 times digital zoom. Press T continually will get digital zoom automatically after 30x full optical zoom. Or choose di…

3, Gimbal Introduction Camera Introduction Camera Description ! Please make sure that the motor is not stopped by any object during the rotation, if the gimbal is blocked during rotation, please remove the obstruction immediately. [1] DJI Skyport [2] Pan motor [4] Tilt motor [3] Roll mot…