Victrola VM-100B Operation & User’s Manual

10, 10 PRODUCT OVERVIEW 1 2 3 4 5 6 7 8 1 1. Speaker 2. Bluetooth Indicator 3. Cue Lever 4. Speed Selector 5. Tone Arm Holder and Clip 6. Tone Arm 7. Turntable 8. Stylus Cartridge Speaker: Turntable: …

6, 6 (21) Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards…

12, 12 CONNECTIONS 1 DC I N LI NE OUT L R PAIR ON OF F To the Line In/AUX In jacks on the external audio amplifier RCA Audio Cable(not included) Connect the Turntable through LINE OUT Jacks to the external amplifier 2 Connect the Turntable through LINE OUT Jacks to the LINE IN jack of t…

4, Victrola VM-100B 4 (6) Clean only with dry cloth The appliance should be cleaned only as recommended by the manufacturer. (7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet and in the back or bottom are provided …

9, 9 HOW TO REPLACE THE STYLUS Guide Pins(inside) The stylus should last about 50 hours under normal use. However, it is recommended that the stylus be replaced as soon as you notive a change in sound quality. Caution: Do not remove or bend the sylus. To avoid injury, do not touch t…

15, 15 LISTENING TO A RECORD Before operation, detach the stylus guard ( white plastic cover ) by 3. Slide the BT/PHONO switch to PHONO mode. Place a record on the center spindle. Note: If you are playing a 45 RPM Single (small size record), place the 45 RPM adapter to the center spindle…