TFortis PSW-2G2F+UPS Operating Instructions Manual

6, Automatic restart in case of camera hanging The switch controls operation of the video camera. In case of hanging, the switch will restart the camera automatically over PoE. It allows to create unattended IP video surveillance networks. Operation in a ring or in a chain con…

1, Operating Manual PSW-2G2F+UPS Multifunction Gigabit Managed Switch with built-in UPS for connection to IP video cameras that support IEEE802.3at. Version 5 …

13, 2.8.2. Description of UPS operation The switch has a built-in UPS based on PSU, charge controller and battery (if included). The operation status is described by three indicators "VBAT", "VOUT" and "VAC". Table 2.8.2-1 – UPS indicators Indicato…

23, TFortis PSW-2G2F+UPS 6.2. Optical connections Inside PSW-2G2F+UPS switch there are no elements for welding optical fiber. It is recommended to use external optical distribution frames. 6.3. Power supply connection The switch is connected to 220V AC source. Power supply cable is pulle…

8, 2.2. Components layout Figure 2.2-2. Layout of components in PSW-2G2F+UPS switch During normal operation, CPU indicator should blink intermittently with 2 sec. period (1 sec. –ON, 1 sec. – OFF). DEFAULT indicator shall be ON, when the device operates with factory set…

3, Contents 1. Purpose ..................................................................................................... 4 2. Description ................................................................................................ 6 2.1. Appearance .....................…