Sea Wit 9138H Operation & User’s Manual

13, 12 B. Automatic Keyboard Switch： C.The buzzer will sound during the switching: D. Auto Detection for Active Port: Press Right <Ctrl> + Right <Ctrl> + <S> + <Enter> enable the automatic scan function. (The default interval time is 8 seconds) Note: Press Right &l…

10, Switch Method 9 Note： 1, The keyboard and mouse must be plugged into the ports of the KVM switch that with the keyboard and mouse logo. When you use wireless keyboard and mouse, the bluetooth unified receiver must be plugged into the port with keyboard logo. 2, During the automatic sc…

14, Specification 13 Auto detection function: The KVM switch can automatic sequential scan all of the active connected devices. The default setting of auto detection function is off. Right <Ctrl> + Right <Ctrl> + <R> + <Enter> Reset KVM System: To solve the malfunct…

15, Sea Wit 9138H Frequently Asked Questions Question 1：Why there is no output? 1, Please make sure that whether the HDMI cables are firmly connected to the ports of the switch and display monitor. 2, Please try to replace new HDMI cables. 3, Restart all devices. 4, Please make sure that the …

11, 10 The green light lights up means the USB-B cables is working fine. Scan button lights up means the automatically scan function is on Power button lights up means the power is on. 1, Panel Switch： Switching by pressing the panel switch button to the corresponding connected device, the n…