Atek 1-10KVA Operation & User’s Manual

40, ３７ 614-06440-10 …

11, ８ 5. Connection and Operation Figure 2: Connection diagram of 2KS(CE) and 3K(S) 2.3) Computer Connection: Connect your computer to the outlet sockets of the UPS system following the above diagram. 3) Battery Charge: Fully charge the batteries of the UPS s…

30, ２７ 14. Trouble Shooting Problem Possible cause Solution The #1 Fault LED and the #6 LED are turned on, the buzzer beeps continuously. The UPS transfers to fault mode due to internal overheat. Make sure the UPS is not overloaded; the air vents are not blocked and the ambien…

7, ４ 2. Description of commonly used symbols Some or all of the following symbols may be used in this manual. It is advisable to familiarize yourself with them and understand their meaning: …

6, Atek 1-10KVA ３ 1. Safety and EMC instructions 1.4 Transport ★ Please transport the UPS only in the original packaging (to protect against shock and impact). 1.5 Storage ★ The UPS must be stockpiled in the room where it is ventilated and dry. 1.6 Standards Only the units with CE markings a…

22, １９ 10. Installation 10.4 Parallel operation 1. Brief introduction of the redundancy N+X is currently the most reliable power supply structure. N represents the minimum UPS number that the total load needs; X represents the redundant UPS number, i.e. the fault UPS number th…