Politec ALES Series Installation Manual

19, Politec ALES Series 19 ALES 60 | 120 Repeated false alarms • Utilizzare il cavo schermato per l’alimentazione collegando la calza alla massa (è consigliato, in caso di problema persistente, collegare allarme/tamper e alimentazione con due cavi schermati separati)…

6, 6 ALES 60 | 120 5.1 Predisposition of the parts of the barrier before installation Since the communication between the barriers can take place by wire, wirelessly and their alignment can be done by optical means, it is advisable to check all the component parts of the barriers…

4, 4 ALES 60 | 120 This installation manual contains important information regarding installation safety: all instructions must be read before installing. Keep this manual for future use. In case of doubt during the installation, avoid making unnecessary attempts but contact the assistance …

18, 18 ALES 60 | 120 I can’t find alignment • Verify that there are no obstacles of any kind interposed between RX and TX and that site compliance does not represent an impediment; • Verify that the power supply on the terminal board is…

17, 17 ALES 60 | 120 It is possible to set the barrier for the rapid alarm (crossing on a run) or slow (crossing with walking). By adjusting the potentiometer counterclockwise, the trip time up to 500ms is increased. In this condition the alarm of a person crossing…