Polhemus PATRIOT Operation & User’s Manual

12, Polhemus PATRIOT USER MANUAL Figure 1-6 USB Cable Connection 8. At this point, you may turn on the PATRIOT system using the power switch located on the back panel of the SEU. A system status indicator located on the front panel should flash red for 5 to 10 seconds indicating self-test and…

49, USER MANUAL ‘O’ – Output Data List Description: This command allows the user to define the list of variables to be output to the host computer for the specified station. Any combination of up to 20 items that produces a P&O response frame of less than or equal to 1000 by…

36, USER MANUAL ‘B’ – Boresight Description: This command causes the sensor to be electronically aligned in orientation and optionally, position, with the user system coordinates and establishes the boresight reference angles for the station. Azimuth, elevation and roll …

59, USER MANUAL ‘^B’ – Un-Boresight Description: This command causes the sensor boresight rotation matrix to be reset to the identity matrix for the specified station. If the origin of the station was previously reset using the ‘B’ – Boresight command (see page 28)…

68, USER MANUAL Table 2-37 ‘^X’ Binary Response Byte Index Format Description 0-7 Binary Header 8 CH[16] Current Config ID 24 CH[16] Default Config ID 40 CH[16] Config Slot 1 10 56 CH[16] Config Slot 2 10 72 CH[16] Config Slot 3 10 88 CH[16] Startup Config ID …