sewerin SeCorr C 200 Operating Instructions Manual

74, 66 │ 6 Appendix Power supply Power supply 2 x lithium ion batteries (rechargeable) [1357-0002] Operating time, typical > 10 h Battery power 2 x 24 Wh Charging time < 7.5 h Charging temperature 0 °C – +40 °C Charging voltage 12 V Charging current 1.2 A Charger AC/DC adapter L (charge …

60, 52 │ 4 Settings 4.3.2.3 Spectrum 1 or Spectrum 2 Auto-power spectrum of the noises transmitted from transmitter 1 or transmitter 2 to the receiver. The options are: ● blue | red Colour that can be selected for the graph. ● Off The function is not displayed. 4.3.3 Pipe dat…

10, 2 │ 1 Introduction 1.2 Purpose SeCorr is a system used for correlation. The SeCorr system can be used for: ● Detecting leaks in water pipes Note: All descriptions in these operating instructions refer to the system as delivered (factory settings). The manufacturer reserves the …

20, 12 │ 2 SeCorr system File The File menu is opened by pressing the Filebutton. The follow- ing actions can be performed in this menu: ● Save measurement ● Load saved measurement ● Delete saved measurement Fig. 10: File button For information about saving, loading and deleting…

39, sewerin SeCorr C 200 3 System in use │ 31 ● To do this, tap the Clear button again. Delete mode is disa- bled. The dot on the Clear button turns grey again. The measurements in the list appear in black. OR ● Tap Back. 3.5 Optimising the correlation result using lters Note: The SeCorr system has…