Plantronics Savi 8200 Series Operation & User’s Manual

17, People I talk to can hear a buzz in the background. Move the base further away from your phone. See Position Your Base. If the base power supply is plugged into a power strip, plug it into the wall directly. The handset lifter is installed but does not lift the handset. Be sure the hands…

20, Plantronics Savi 8200 Series Support NEED MORE HELP? plantronics.com/support [email protected] Plantronics, Inc. Plantronics B.V. 345 Encinal Street Santa Cruz, CA 95060 United States Scorpius 171 2132 LR Hoofddorp Netherlands © 2018 Plantronics, Inc. The Bluetooth ® word mark and logos are registered t…

6, Using the diagram, connect your headset system. Choose a desk phone setup A, B or C and connect cables. A Desk phone (standard) USE • Connect one end of the telephone interface cable to the back of the base • Disconnect the handset coil cord from the base of the desk phone and re…

2, Contents DECT Information 3 DECT Enhanced Security 3 Overview 4 Base and Headset Basics 4 Accessories 5 Hook up your system 6 Desk phone setup details 6 Position Your Base 7 Fit and charge 8 Customize Your Headset 8 Charge Your Headset 8 Talk Time 8 Headset Battery Status 8 Pair you…

11, 1 2 3 4 5 6 1 Volume wheel Rotate volume wheel to adjust volume 2 Call button Press to place, answer, end a call 3 Mute button During a call, press to mute and unmute 4 Headset LED Flashes when in use 5 Power button Toggle on and off 6 ANC (Active Noise Canceling) Toggle on and off …

15, NOTE If the base subscription LED goes solid red, after flashing red/green, the subscription attempt has failed and should be repeated. End Subscription If the base is in subscription mode and you want to stop the base from searching for a headset, press the subscription button again. …