TRU-BOLT 0711016 Operation & User’s Manual

13, TRU-BOLT 0711016 Page 13 Locking and Unlocking 1. TO UNLOCK THE LOCK Using Keypad: Enter a valid User Code (default code is 1234) and press and hear 1 beep and lights green. 2. TO LOCK THE LOCK Using Keypad: Press and then hear 2 beeps and lights red. Basic Functions 3. DELETE ALL USER CO…

12, Page 12 PROGRAMMING AND O PERA TING INSTRUCTIONS Indicator light Used to “Unlock” door and for programming Batteries (not included) AA AA AA AA Symbol Key - Lock / Clear - Unlock / Enter - Programing Code - User Code (4-8 digits) - User ID (01-50, 2 digits) P…

11, Page 11 BATTERY INSTALLATION 14. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the direction noted +/- on the Compartment. The Lock will beep 2 times, the Keypad will illuminate blue, and the Tru-Bolt button will ash green twice t…

8, Page 8 9. INSTALLING THE INTERIOR ASSEMBLY 1. Gently move the switch to “L” for Left Handed Door 2. Gently move the Switch to “R” for Right Handed Door a. Set the Entry Switch for Left or Right Handed door a. Using a 1/16” drill bit, drill a pilot hole in your door using the Mounting Pl…

6, Page 6 5. IDENTIFYING YOUR DOOR HANDING a. If the hinges are on the left your door is Left Handed b. If the hinges are on the right your door is Right Handed Stand outside the door You are standing outside the door Right Handed Door Hinges are on the right side Left Handed Door …

10, Page 10 BATTERY INSTALLATION 14. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the direction noted +/- on the Compartment. The Lock will beep 2 times, the Keypad will illuminate blue, and the Tru-Bolt button will ash green twice to signify that it …