Prestel HD-PTZ9IP Operation & User’s Manual

43, Prestel HD-PTZ9IP 43 1. Make sure you have set presets. Otherwise, you cannot set this parameter. For details about how to set a preset, see Setting Presets. 2. When an alarm is reported, the PTZ camera automatically goes to the preset to capture video in the correct scene. d. Upload to FTP i. Wit…

52, 52 1. Click Setup > Common > Navigation. 2. Click Refresh for the latest status information. 3. View the device information. Maintenance Upgrading the Device If the device is managed by the central management server and you want to upgrade the devices in batch mode, it …

10, 10 System Configuration Connection In this connection configuration, HDMI cable, SDI video cable, data cable, Network cable is required. To obtain these third party components or accessories, Notes Use only the AC power adaptor (JEITA type4) supplied with the unit. Do not u…

15, 15 PELCO P/D Keyboard RS485 Connection 1. Set RS422 control method on Bottom Dip Switch (See page 15). 2. Set Baud Rate on Bottom Dip Switch to the same as Baud Rate setting on the keyboard you are using. (See page 16). 3. Reboot the camera by turning it Off/On after the Bottom Dip Switc…

38, 38 On certain occasions, you may need to set a mask area on the camera image to protect privacy, for example, the keyboard of an ATM machine. When PTZ changes its position or zooms, the Privacy Mask will be adjusted accordingly to protect the area all along. NOTE: This functio…

18, 18 Adjusting and Setting with Menus About On-Screen Menus You can change various settings, such as shooting conditions and system setup of the camera, while observing menus displayed on a connected computer screen. This section explains how to read the on-screen menus befo…