Tornatech GPD Installation And Maintenance Manual

4, 4 Update Program Page ............................................................................................................................................. 37 Factory Settings ....................................................................................................…

47, 47 First Service Statistics History > Statistics > First Service Statistics This page allows the user to view the “First Setup Statistics”. The parameters are: From: - Since: Date of the first setup - On Time: Time the controller spent On, in DAYS-HOURS:MIN…

26, 26 - Pressure Transducer fault detected: Occurs if the pressure reading is out of its normal range. Additionnally, if an optional dual pressure sensor is installed, it will be activated if the two pressure transducers show different readings. Further investigation is advised to determi…

21, Tornatech GPD 21 Home (Menu) Home The home page displays all controller statuses and important values of the controller. This includes all voltages, currents, pressure, engine state and status, as well as all timers and cranking sequences. A- Navigation bar: Pressing this icon will open a…

58, 58 TORNATECH MODEL GPD DIESEL ENGINE FIRE PUMP CONTROLLER FIELD ACCEPTANCE TEST REPORT Note: This document is the Tornatech official Field Acceptance Test report which follows the latest NFPA 20 requirements of article 14.2.6 Controller Acceptance Test pertinent to diesel engine …

14, 14 Once the controller has booted up, the “First Start Up” page appears. Press “User Login” and enter a valid authorization code. Once logged in, press “Power”. The “Power” page will automatically validate the power if no alarm is detected and if …