Shihlin electric PD301 Instruction Manual

13, GSD FILE 10 Repeater_Ctrl_Sig = 2 24V_Pins = 0 ; Supported baudrates 9.6_supp = 1 19.2_supp = 1 45.45_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp…

25, COMMUNICATION FUNCTION 22 Note: 1、In IND, the weight of bit 15 is 2 0 , so when parameter number is from 2000 to 3999, bit 15 should be 1. 2、All of parameters in Shihlin inverter are 16-bit value, and 16-bit parameter value is transferred by PWE2 (the fourth character), Profibus-DP mas…

20, COMMUNICATION FUNCTION 17 7.2.1.2 SAP 58 (Global_Control) This SAP is used to send special command to single slave, a group of special slaves or send once to all slaves (broadcast). Global_Control data type: Octet String consists of 8 octets / Length: 2 DU (Byte) Descrip…

10, GSD FILE 7 6、GSD FILE 6.1 GSD file description GSD file is designed to recognize the features and functions of Profibus-DP. GSD file is a text file which can identify Profibus-DP device (master station or slave station). GSD file contains the necessary data information on the stan…

7, Shihlin electric PD301 WIRING 4 4、WIRING 4.1 DB9 connector PD-301 adopts DB9 connector to connect to Profibus network, shown as the following: 6789 45 3 2 1 Refer to the table below for the definition of a connect. Pin No. Function name Description and function 1 -- -- 2 -- -- 3 RXD/TXD-P …