Pyro Products Pyro Tower Assembly Manual

4, 2 Parts List Your Pyro Tower is constructed from 3/16” steel and requires four boxes for safe shipping because of the size and weight of the pieces. Below you will find a description of the parts contained in each box: Tower Side Pieces Tower Back Piece Tower Front Piece Removable She…

9, 7 Shoulder Tabs The Shoulder Tabs are inserted into the smaller slots on the Tower Side Pieces. The hole in the Shoulder Tab will align with the hole on the Front and Rear Tower Pieces where a bolt is inserted to secure the pieces together. Shoulder Tab Corresponding Bolt Ho…

2, Pyro Products Pyro Tower WARNING: FOR YOUR SAFETY 1. This appliance is for outdoor use only and should NOT be used in a building, garage, or any other enclosed area. 2. Do NOT use this outdoor fire pit for indoor heating. TOXIC carbon monoxide fumes can accumulate and cause asphyxiation. 3. This outdoor fire pit…

10, 8 Bolt Hardware Sequence Below is a description of the proper assembly sequence to secure the Pyro Tower hardware: Bolt Flat Washer Shoulder Tab Flat Washer Lock Washer Hex Nut …

15, 13 Assembly Sequence Two people are recommended for easy assembly. One person can easily hold the pieces in position while the second person aligns the slots and tabs. Once all of the pieces are in position the unit become self-supporting so you can safely and easily secure the…