Total Control Products RCKP214 Installaton Manual

33, 4 11. Thread the locknuts onto the bolts from the engine compartment side and tighten. 12. The column clamp will already be on steering column as instructed in the 7903-COLM-01 installation guide. 13. Insert completed steering column assembly through the rewall seal. (Figure 2-2…

25, 4 STEERING COLUMN PREPARATION 13. Measure, mark, and then cut the steering column tube to an overall length of 29-5/16”. A band saw or cut-off wheel can be used. 14. Remove sharp edges with a le or similar tool. STEERING COLUMN ASSEMBLY 15. Slide the blue anodized split-collar…

5, 4 1. Remove the battery cable from the negative side of the battery. 2. Raise the vehicle using a two-post lift or jack and secure with jack stands so that the suspension hangs freely and the vehicle is safe to work underneath. 3. Unbolt the factory tubular crossmember that runs un…

4, Total Control Products RCKP214 3 PARTS LIST RCKP-01 - Power Rack and Pinion, BB Mustang Left Hand Drive Qty Part Number Description 1 TCP RCKP-01 Power rack and pinion, left-hand drive, big-block Mustang/Cougar 1 7900-184 Big-block mounting bracket set 7900-184 - Mounting Bracket Set, Big Block Qty Part Number Description 3 7…