PTS Diabnostics CardioChek Plus Operation & User’s Manual

26, 50 51 CardioChek Plus Analyzer Calibration Curve: Input from MEMo Chip per test strip lot Batteries: (4) AA 1.5 volt alkaline Operating Temperature Range: 50-104°F (10-40°C) Note: The analyzer temperature must be within the test strip temperature specications to function as a …

20, 38 39 How to Clear Results Stored in Memory 1. Press either button to turn on the analyzer. Wait for the display to read either INSTALL MEMO CHIP or INSERT STRIP. 2. Press Enter, then press Next until UTILITY is displayed. Press Enter. 3. Press Next until CLEAR MEMORY is displayed. Press Enter…

6, 10 11 The MEMo Chip Each package of PTS Panels test strips contains a color-coded lot-specic MEMo Chip. The MEMo Chip contains the settings for each test. The bottom has a label with the test name and lot number. Always insert the MEMo Chip in the port at the top of the analyzer with the lo…

7, 12 13 PTS Panels® Test Strips PTS Panels test strips are designed for specic analytes. A test strip is inserted into the analyzer, then blood is applied to the blood application window for reectance tests or the tip of the test strip for electrochemical tests. As previous…

14, PTS Diabnostics CardioChek Plus 26 27 How to Get Help and Information Regarding Your CardioChek Plus Analyzer 1. If the analyzer is off, press either button to turn on the analyzer. Wait for the display to read INSTALL MEMO CHIP or INSERT STRIP. Note: If RUN TEST is displayed, go to Step 3. 2. Press Next. The display will …