PSG Wilden H1500 Saniflo HS Series Manual, Engineering, Operation & Maintenance

6, WILDEN PUMP & ENGINEERING, LLC 4 WIL-12350-E-05 Section 4 DIMENSIONAL DRAWING H1500 HS Vertically-Mounted, Center- Ported with Ball/Mushroom Valve DIMENSIONS ITEM METRIC (mm) STANDARD (inch) A 599 23.6 B 201 7.9 C 543 21.4 D 678 26.7 E 1156 45.5 F 1209 47.6 G 74 2.9 H 310 1…

14, WILDEN PUMP & ENGINEERING, LLC 12 WIL-12350-E-05 Step 13 After loosening, remove the outer piston and diaphragm assembly. NOTE: If using an IPD, un-thread from the shaft. Step 14 Loosen tubing nuts located at each pressure relief valve. Next, loosen pipe fitting and elbow. This wi…

18, WILDEN PUMP & ENGINEERING, LLC 16 WIL-12350-E-05 Step 33 Using a hex wrench, remove the fasten- ers that connect the inner piston to the diaphragm assembly. Inspect diaphragm for nicks, gouges, chemical attack or abrasion. Replace if necessary with genuine Wilden ® parts. Step …

3, PSG Wilden H1500 Saniflo HS Series WIL-12350-E-05 1 WILDEN PUMP & ENGINEERING, LLC CAUTION: Do not apply compressed air to the ex- haust port — pump will not function. CAUTION: Do not over-lubricate air supply — excess lubrication will reduce pump performance. Pump is pre-lubed. TEMPERATURE LIMITS: NOTE: Not a…

15, WIL-12350-E-05 13 WILDEN PUMP & ENGINEERING, LLC Step 17 Inspect air valve gasket for nicks, gouges, chemical attack and replace if necessary with genuine Wilden ® parts. Step 19 Using a hex wrench, remove the two (2) air-valve manifold fasteners. Step 18 Using a pair of sna…