ATN Night Shadow 2 Operation & User’s Manual

9, 8 TROUBLE SHOOTING Q: Flashes, flickers, or clicking occur while operating S: If it occurs within the first five minutes of inserting new batteries it is normal and the device will resume normal operation soon thereafter. If it occurs after 10 minutes contact to your dealer or other au…

5, 4 USING THE CAMERA ADAPTER (OPTIONAL) To use your Night Shadow with a 35-mm camera or camcorder you will need the following: 1) If you plan to use a camcorder then camcorder must have a MACRO feature. Most modern camcorders today have a MACRO feature built in. 2) If you plan to use a …

11, ATN Night Shadow 2 10 2 YEAR PRODUCT WARRANTY This product is guaranteed to be free from manufacturing defects in material and workmanship under normal use for a period of 2 (two) years from the date of purchase. In the event a defect that is covered by the foregoing warranty occurs during the applicable period …

7, 6 OPERATION • Take the biocular out of the case. • Install the batteries into the housing with the polarity order as shown on the biocular. Battery Type: 3-Volt Lithium, #CR123A. • Press the button marked -/O to turn the unit on with the protective lens covers still attached …

6, 5 • Make sure that the unit is turned off. • Make sure that the unit is turned off. • Unscrew 90mm lens off the body of the Night Shadow • Unscrew 90mm lens off the body of the Night Shadow • Screw the doubler onto the back of the lens. • Tighten the screw on the Doubler (screw-…