USC LPX Operator's Manual

21, Page 21 LPX AUTOMATED SEED TREATER ROTATING DRUM The rotating drum comes in options of 6, 8, and 10 feet and accepts treated seed through the opening on the hopper end. As seed passes through the length of the drum it is tumbled, producing accurate and uniform seed coating. The …

123, Page 123 LPX AUTOMATED SEED TREATER Item # Part # Description Qty 1 02-02-0007 VLV BALL .500 NPT 3WAY BRSS 1 2 02-02-0050 FLTR EXHAUST BRZ .250 NPT ML 1 3 02-02-0063 VALVE SS BALL .500 NPT 3-WAY AIR ACTUATED 1 4 02-07-0019 NIPPLE, .500-14 NPT, 3.0"LG 304SS…

11, Page 11 LPX AUTOMATED SEED TREATER SAFETY SIGNS 1. Keep safety signs clean and legible at all times. 2. Replace safety signs that are missing or have become illegible. 3. Replaced parts that displayed a safety sign should also display the current sign. 4. Safety signs are avai…

51, Page 51 LPX AUTOMATED SEED TREATER 1. To begin the calibration process, fill the appropriate mix tank with the slurry that is going to be used for this calibration. 2. Turn the corresponding pump to the hand position and adjust the flow rate until it reads …

53, USC LPX Page 53 LPX AUTOMATED SEED TREATER 1. Under the H-O-A screen, place the DRUM, ATOMIZER, SEED WHEEL, INLET CONVEYOR, OUTLET CONVEYOR and desired pumps in AUTO. 2. Next, prime the chemical line to the atomizer. Ensure that the valve on each of the chemical attachment ports on the tre…

73, Page 73 LPX AUTOMATED SEED TREATER FINAL 1. Store the machine inside a protective building to keep it from being exposed to the weather. 2. Disconnect power to the machine. 3. Ensure all guards and safety signs are in place. ROTATING DRUM 1. Remove the shields and clean out any see…