Upsen Queen Star Series Operation & User’s Manual

26, 25 6. Notes for battery disposal and battery replacement 1) Before disposing batteries, remove conductive articles such as necklace, wrist watches and rings. 2) If it is necessary to replace any connection cables, please purchase the original materials from t…

24, Upsen Queen Star Series 23 4. Operation and Operating mode Pin number Function description I/O 3 Rxd Input 2 Txd Output 5 GND Ground 2) User enables to monitor and manage the UPS through installed the AS400 card (optional). PIN1: UPS failure (normally open, active close…

35, 34 8. Chapter Operation (LCD model) 2) If load is more than 105 percent, the buzzer beeps twice every second, meanwhile, the warning icon blinks every second too, reminding that you have been overloaded. You should get rid of some unnecessary loads …

38, 37 8. Chapter Operation (LCD model) When a warning occurred, the fault icon blinks every second, and users can switch to the alarm display page shown as the figure 8-6 to check the warning code. Figure 8-6 Alarm display 8.3 Operating Instr…

30, 29 Appendix 1 Description of Display panel Table Appendix 1 Description of indicators No. Color Indicator Description 1# Red Fault indicator When the indicator on, it shows that the UPS in abnormal condition. 2# Orange Load/batte…