Unitronics UniStream Installation Manual

10, UniStream ® Display Upgrading Firmware 1. Place a USB flash drive containing the firmware update into the USB port. 2. Select the System tab, tap Upgrade, and follow the on- screen instructions. Note that Firmware updates are located on the Unitronics website, on th…

2, UniStream ® Display Programming Software All-in-One UniLogic software for hardware configuration, communications, PLC and HMI applications; free download. HMI All UniStream® PLCs can display HMI screens on the following devices: • UniStream Display (USL) • Uni…

9, UniStream ® Display Connecting Ports  Ethernet CAT-5e shielded cable with RJ45 connector  USB Host Standard USB Type-A plug Uninstalling the Device 1. Disconnect the power supply. 2. Remove all wiring. 3. Unscrew and remove the mounting brackets, taking …

7, UniStream ® Display 1. Prepare a panel cut-out according to the dimensions as shown in the previous section. 2. Slide the device into the cut-out, ensuring that the Panel Mounting Seal is in place as shown below. 3. Push the mounting brackets into their slots on the sides of the…

1, Unitronics 1 UniStream ® Display Installation Guide: USL-050-B05, USL-070-B05 SCAN to download This guide provides basic installation information for UniStream ® Display models. Displays are compatible with UniStream ® PLCs. Technical specifications…

3, Unitronics UniStream UniStream ® Display Before You Begin Before installing the device, the user must:  Read and understand this document.  Verify the Kit Contents. NOTE  Throughout this document, images based on the USL-050-B05 apply to all models. Alert Symbols and Gene…