Aube Technologies TH150 Series Installation And User Manual

1, TH150 400-150-000-C 5/9/06 1/6 1. Introduction The TH150 Series electronic thermostat is designed for low-voltage pressure-dependent variable air volume (VAV) applications. It comes in four different models: Depending on the model, the TH150 thermostat can have up to t…

2, TH150 400-150-000-C 5/9/06 2/6 3. Typical Applications FIGURE 1: Damper control with electric reheat and auxiliary baseboard heating. FIGURE 3: Damper control with automatic changeover, elec- tric reheat and central cooling FIGURE 5: Changeover and NSB inpu…

3, TH150 400-150-000-C 5/9/06 3/6 4. Configuration 4.1 Configuration Menus 1A model Application (section 4.2) Default mode & Output 1 type (section 4.3.1) NSB value (section 5.6) Output 1 min. opening (section 4.3.2) Maximum setpoint (section 4.6) Min…

4, TH150 400-150-000-C 5/9/06 4/6 4.2 Application Types The following table shows the different thermostat applications and their corresponding settings in the configuration menu. 4.3 Output 1 Output 1 is used to control a damper. It controls heating when the thermost…

5, TH150 400-150-000-C 5/9/06 5/6 4.5 Output 3 (models TH150-1A2T and TH150-1F2T) The following table shows the output types for Output 3 and their corresponding settings in the configuration menu. When any setting between 1 and 4 is selected, Output 3 controls heating only, …

6, Aube Technologies TH150 Series TH150 400-150-000-C 5/9/06 6/6 5.5 Mode Changeover The thermostat can switch between heat mode and cool mode either via: • the automatic changeover • the changeover input 5.5.1 Automatic changeover In automatic changeover, the thermostat detects when the sys…