Aube Technologies TH109PLUS Owner's Manual

10, Aube Technologies TH109PLUS Owner’s Guide 400-109-005-A 8 n Press the Up and Down buttons simultaneously for three seconds to enter the setup menu. o Press the Up or Down button to change the option. p Press the Up and Down buttons simultaneously and briefly to advance to the next parameter. q When the last parameter …

11, TH109PLUS 9 In case of difficulty PROBLEM SOLUTIONS Thermostat is hot. This is normal unless the thermostat is too hot to touch. Ensure that the heater capacity does not exceed the thermostat’s maximum load. Wrong temperature is displayed. Avoid any of the following conditions: • Th…

8, Owner’s Guide 400-109-005-A 6 Configuration switches are on the back of the faceplate. Factory settings are inside gray cells. 1 The thermostat buttons are disabled and appears on the screen (see page 2) when the settings are locked. 2 Place at Fan Yes if you have a fan-forced heater (to …

5, TH109PLUS 3 TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRICAL SHOCK.  The installation must be performed by a qualified electrician and must com- ply with electrical codes of your region.  Do NOT install the thermostat in an area where it can be exposed …

13, TH109PLUS 11 Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of three (3) years from the date of pur- chase by the consumer. If at any time during the warranty period the produ…

9, TH109PLUS 7 The thermostat generally displays the room temperature. • To display the set temperature (setpoint), press the Up or Down button once. The setpoint temperature will remain on the screen for 5 seconds. • To change the setpoint temperature, press the Up or Down button repe…