Si-tex EXPLORER II Manual 

71, 73 User Manual (4800-N82-I), (9600-N81-N), (9600-N81-I) or disable (OFF). The default setting is (4800-N81-N). 'MENU' + "ADVANCED" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "NMEA0183 I/O PORT" + 'ENTER' Obstruction…

57, 59 User Manual 5 Terms & Functions This section explains the terms that may be unfamiliar to the reader. The symbol n indicates that the term is followed only by an explanation, while the symbol indicates that the term is more widely explained; you will also find a briefly description on…

30, 32 User Manual Depth Areas On On On Off On Depth Areas > 0005 0005 0005 0005 00002 Mt Depth Areas < 0030 0030 0030 0030 00009 Mt Depth Lines & Soundings On On On Off On Depth Lines & Soundings > 0000 0000 0000 0000 00000 Mt Depth Lines & Soundings < 9999 0005 9999 …

109, 111 User Manual Input Data Display .................................89 Input/Output .......................................... 69 Inserting MOB ....................................... 71 Inserting R/B ......................................... 52 Inserting Target ..........................…

40, Si-tex EXPLORER II 42 User Manual Editing notes 'MENU' + "ROUTE" + 'ENTER' + "SELECT" + 'ENTER' + 'N OTES ' Another window is shown: insert the notes (this is allowed only if you have already created a route). Press 'ENTER' to confirm (&a…

24, 26 User Manual On the right side of the screen (see Fig. 3.1.5) there is a polar representation of the Azimuth and Elevation of each satellites. The circles contain a number indicating the PRN of the satellite and they are filled when they are used for the fix solution. On the lef…