Audio Note M2 Phono Balanced Manual, Owner's Information

2, Introduction to the M2 Phono Balanced pre-amplifier Congratulations on your purchase of the Audio Note M2 Phono Balanced level 2 pre-amplifier. Audio Note Level System First, a word about how we classify our products at Audio Note. The world renowned Audio Note Ongaku, Kegon and Gaku-on amp…

6, After-care Cleaning Cleaning the M2 Phono Balanced is best done with a soft brush - some photographic stores are able to provide suitable brushes. Alternatively, a soft cotton cloth may be used with a mild propriety cleaner for removing dirt build-up. Strong or alcohol based solvents may damage the…

9, Safety Information HEAT: By the nature of vacuum tubes, this product generates high levels of heat. Adequate ventilation must be provided. Do not restrict the airflow through any of the ventilation slots or place the amplifier on any surface that may restrict airflow. CAUTION: The vacuum t…

7, Technical overview The M2 Phono Balanced utilises simple but sonically effective circuitry using vacuum tube technology rather than complex techniques using impure semi-conductor type devices, so common in the audio industry. This kind of circuit architecture is incredibly transparent…

5, white for left channel. NOTE: The balanced/unbalanced selection switch must be set to the appropriate position. It is not recommended to use both the balanced and unbalanced outputs simultaneously. Mains power connection Use the supplied cable to connect the IEC inlet socket on the pre-a…