WoodFast BS230A Instruction Manual

3, -3- 1. GENERAL INFORMATION 1.1 FOREWORD Some information and illustrations in this manual may differ from the machine in your hand, since all the configurations inherent in the machine complete with all the optional are described and illustrated. Therefore, refer only to that information …

1, WoodFast BS230A Instruction Manual IMPORTANT For your safety, read instructions carefully before assembling or using this product. Save this manual for future reference. Original Instruction V. 1-201810 /RIGINAL¬)NSTRUCTION¬-ANUAL 6ERSION¬ &EBRUARY¬ 7OODWORKING¬-ACH…

11, WARNING WARNING -11- 5.5 TENSIONING THE BLADE Turn the blade tension adjusting knob (A) Fig.5.4 clockwise until the blade is tensioned. The blade tension can be checked by pushing on the blade midway between the two wheels. The blade should move slightly with firm finger pressu…

9, -9- 4.1 INSTALLING THE TABLE - Remove the carriage bolt and plastic nut from the table (see B & C Fig.4.1.2 as reference) to allow the blade to slide into the table slot. Slide the blade through the slot in the table and then place the table (A) Fig.4.1.1 onto the bandsaw trunnion (B…

7, 3.2 TECHNICAL SPECIFICATION SPECIFICATION BS230A Blade length 1511mm Blade widthr 3-6.5mm Blade speed 800m/min Maximum cutting height 90mm Cutting Throat 220mm Table Size 300x300mm Table Tilt 0-45° Floor to Table Height 305mm Bandwheel Dia. 225mm Motor Power 1/3HP Volt 220-240V/50H…

8, -8- 3.4 NOISE LEVEL No load Load Sound Pressure Level < 80dB(A) < 90dB(A) Sound Power Level < 90dB(A) < 100dB(A) The noise levels measured are emission le…