Wohler RM-3270W-3G2 Operation & User’s Manual

23, Page 23 Figure 3–1: RM-3270W-3G2 Block Diagram Left Speaker Headphone Stereo Audio Amp Right Speaker L R LAN RS-485 In / Out Tally Interface UMD Ethernet Tally Tally Light 2 LCD 2 7" 16:9 With 16-Channel Audio Meters Tally Light 1 Digital Processing Digital …

14, Wohler RM-3270W-3G2 Page 14 Using the Volume Control and the OSD Menus In the following descriptions, refer to Figure 2-5 for the location of the control buttons. Figure 2-5: Screen Control Buttons Volume Control The volume of the speakers and headphones can be quickly accessed by pressing ei…

11, Page 11 Rear Panel Figure 2-3: Rear Panel Layout 1. 3G-SDI In 1: This input connector accepts 3G/HD/SD-SDI video signals. It is compliant with SMPTE 424M, SMPTE 259M, SMPTE292M/ITU-R BT601. It can be viewed by making the SDI1 selection with the Mode button. 2…

15, Page 15 OSD Menus The OSD Menus allow you to adjust a wide variety of control parameters for the monitor. Refer to Table 2-3 through Table 2-9 for typical values and domain ranges. The following is a description of how to use the OSD Menus: 1. Press the Menu button to displ…

9, Page 9 7. Menu: Press this button to display the OSD MENU. Refer to the Using the OSD Menu section of this chapter for operation and content of these menus. 8. Mode: This button switches between the SDI 1, SDI 2, AV (CVBS), and HDMI signal inputs. Pressing the…

5, Page 5 7. Protect the power cord from being walked on or pinched, particularly at plug connection on the equipment and at the socket. 8. Use only the attachments/accessories specified by the manufacturer. 9. Unplug the equipment during lightning storms or when…