VoIP Much Phone Company HT-286 Admin Manual

1, Copyright VoIP Much Phone Company Inc., 2015 Grandstream Gateways & ATA’s HT-286, 502, 503, 701, 702, 704, GWX-4008 & 4004 Admin Guide - MANUAL CONFIGURATION …

3, Copyright VoIP Much Phone Company Inc., 2015 3. Click on the “Basic Settings” option at the top. Your telephones receive their time from the ATA device. Be sure you select the correct time zone below and enter NTP server value (in Advanced Settings): Click Apply. …

5, Copyright VoIP Much Phone Company Inc., 2015 5. Click on the “FXS Port” option at the top The below values can be found in your VoIP Much activation notification. Primary SIP Server = SIP Server Address SIP User ID = ATA Device Username (not your phone#) Au…

4, Copyright VoIP Much Phone Company Inc., 2015 4. Click on the “Advanced Settings” option at the top. To prevent your ATA device from receiving direct IP calls (calls not originating through VoIP Much), set the following option to Yes: Disable Direct IP Call = Yes Your te…

7, VoIP Much Phone Company HT-286 Copyright VoIP Much Phone Company Inc., 2015 The remaining settings on this page remain at their default values. Click Apply. 6. Click Reboot Your ATA will reboot and register to the VoIP Much network. Reboot time can be approx. 1 to 2 minutes. …