Simex SRT-73 Operation & User’s Manual

9, User manual - METER SRT-73 - If the unit is equipped with housing, covers and sealing to, protecting against water intrusion, pay special attention to their correct tightening or clamping. In the case of any doubt consider using additional preventive measures (covers, roofing, se…

40, Microlectra bv. Hermanus Boerhaavestraat 6. 3261 ME Oud-Beijerland. Netherlands. Tel 31(0)186-616290 Fax 31(0)186-610349 www.microlectra.nl [email protected] www.microlectra.nl Microlectra bv. info@microl…

23, User manual - METER SRT-73 t on - turn on delay time, the relay is turned on with delay equal t on if the input value exceeds appropriate border value (defined with threshold and hysteresis ), at least t on time. t on range 0 ÷ 99.9, defined with 0.1 sec. r…

13, User manual - METER SRT-73 4.4. MAINTENANCE The unit does not have any internal replaceable or adjustable components available to the user. Pay attention to the ambient temperature in the room where the unit is operating. Excessively high temperatures cause faster ageing of the interna…

34, User manual - METER SRT-73 ERROR - error code = 60h, bottom border of the measurement range is exceeded 2. Read of device ID code ADDR FUNC REG H,L COUNT H,L CRC L,H 01 03 00 21 00 01 D4 00 The answer: ADDR FUNC BYTE C DATA H,L CRC L,H 01 03 02 20 B7 E1 F2 DATA - identification code…

20, Simex SRT-73 User manual - METER SRT-73 [ESC/MENU] button allow user to exit present menu level and goes to upper level menu (or measurement mode). After about 1 min. since last use of the buttons, device exits the menu mode and returns to the measurement mode (only if no parameters are in editing mode). 7…