SMAR DC302 Owner's Operation And Maintenance Manual

26, DC302 – Operation and Maintenance, Instruction Manual 3.10 Idx Parameter Data Type/ (Length) Valid Range/ Options Default Value Units Store/ Mode Description 50 CTU_PST 16 Unsigned32 Positive 0 None S/ OS Array of 16 unsigned integer32 elements wher…

3, Introduction III INTRODUCTION Until all types of devices are available with FOUNDATION™ Fieldbus systems will have to be of a hybrid nature accepting both Fieldbus and conventional signals. A mixed traditional and fieldbus environment is inevitable during the tr…

12, DC302 – Operation and Maintenance Instruction Manual 1.4 Figure 1.6 – Example of Output Connections The DC302 is a non bus-powered device. The DC302 uses a 31,25 Kbit/s voltage mode option for the physical signaling. Various types of Fieldbus devices may be conne…

44, SMAR DC302 Section 5 5.1 TECHNICAL SPECIFICATIONS General Signal (Communication) Digital only. Fieldbus, 31.25 Kbits/s voltage mode Power Supplies If there are requirements for power supply isolation between inputs and outputs, it is recommended to use at least …

33, Configuration 3.17 For example, the following examples are not allowed in the logic line: O1=TON01(IN1&IN2);: note that the argument is a result of an operation, it is not allowed. O1=TON10(!IN1);: note that the argument is a result of NOT function, it is not allowed. O1=TON10(CTD01(…

14, DC302 – Operation and Maintenance Instruction Manual 1.6 PSI302 + + Junction Box Terminator Figure 1.8 - Tree Topology General System According to the figure below, we can see a general network topology where the DC302 is integrated in a simple Fieldbus network.…