Skyjacker F5852AS Installation Instructions Manual

3, F5852B: ITEM# DESCRIPTION QTY DLB250-B AXLE LINK BRACKET 2 F580UL-L UPPER LINK 2 F580LL-L LOWER LINK 2 HB-L250-43 HDWR BAG:05LINKS W/3643 BUSHING 1 HB-L250-46 HDWR BAG:05LINKS W/3446 BUSHING 1 HB-DLB250 HDWR BAG: AXLE LINK BRACKETS …

10, Skyjacker F5852AS Name: _______________________________________________________ Today’s Date: __________________ Street Address: ________________________________________________________________________________ City: __________________________________________ State: _____________________ Zip: ______________ Da…

8, 30. Attach the factory ABS bracket to the mount on the new upper control arms using the factory bolt. The factory bolt will thread into the tab on the upper control arm. (See Photo #29). Rear Installation: 27. Raise rear and support securely with jack stands and block the front wheels. Remove the t…

5, 9. Locate the new track bar relocation bracket. First bolt the new brack- et to the factory location on the cross member using the 9/16 X 3” fine thread bolts, washers and nuts. Be sure to use the (3) .938” long anti crush spacers between the front of the bracket and cross- member. Do no…

9, FINAL NOTES: • After installation is complete, double check that all nuts and bolts are tight. (Do not retighten nuts and bolts where Thread Lock Compound was used.) • If new tires are installed that are more than 10% taller than original tires, the speedometer must be recalibrated …