Yealink VP59 Auto Provisioning Manual

41, Obtaining the Provisioning Server Address 35 The following figure shows the example messages of obtaining the TFTP server address from an IPv4 custom DHCP option: Right click the root node of the custom option (e.g., option 128) shown on the above figure, and select Copy->Bytes->P…

7, Introduction 1 Introduction Yealink IP phones are full-featured telephones that can be plugged directly into an IP network and can be used easily without manual configuration. This guide provides instructions on how to provision Yealink IP phones with the minimum settings r…

45, Triggering the IP Phone to Perform Auto Provisioning 39 Triggering the IP Phone to Perform Auto Provisioning This chapter introduces the following methods to trigger the IP phone to perform auto provisioning:  Power On  Repeatedly  Weekly  Flexible Auto Provision �…

14, Yealink VP59 Yealink IP Phones Auto Provisioning Guide 8 Auto Provisioning Process Old Mechanism – Without Boot Files The following flowchart shows how Yealink IP phones perform auto provisioning when using configuration files only: …

10, Yealink IP Phones Auto Provisioning Guide 4 Resource Files When configuring some particular features, you may need to upload resource files to IP phones, such as personalized AutoDST file, language package file and local contact file. Resource files are optional, but if the parti…

47, Triggering the IP Phone to Perform Auto Provisioning 41 3. Enter the desired interval time (in minutes) in the Interval(Minutes) field. 4. Click Confirm to accept the change. Weekly The IP phone performs auto provisioning at a random time every week/month/quarter. You can configure…