Wise P941 Instruction Manual

7, 7. Contact Point Working Type and Connection 1) 1 Contact point type 2) 2 Contact point type 8. Installation 1) Store this product free of moisture, vibration, dust or corrosive gas. 2) Avoid higher temperature than specified in this manual. 3) Be prepared for lightning or vapor. 4) A…

4, 1. Introduction P941, P942 is a pressure switch product with a built-in micro switch, and is so designed that it can be used for corrosive fluid or high pressure process. The switch is divided into a sensor part under pressure, a control part that regulates the set value and inflow p…

2, Please read instructions carefully prior to using the instrument for proper and safe operations. Mishandling could cause device malfunctions and result in disastrous injuries or accidents. 1. Do not exceed the pressure range allowed. 2. Do not use it to measure the pressure of corrosive…

3, Wise P941 1. INTRODUCTION 2. FEATURES 3. SPECIFICATION AND STANDARDS 4. STRUCTURE AND FUNCTION 5. OPERATING PRINCIPLE 6. TRANSPORTATION, STORAGE AND OPENING 7. CONTACT POINT WORKING TYPE AND CONNECTION 8. INSTALLATION 9. WIRING 10. MAINTENANCE AND OPERATION CONTENTS …

6, 5. Operating Principle As shown in diagram below, the bourdon tube transmits the position change according to pressure change through a lever to open or close the micro switch. 6. Transport, storage, and opening 1) Attention in case of transportation Please pay sufficient attention to tran…