Winter Gardenz PG0812H Assembly Manual

19, Side wall assembly Step 3. Step 1. Step 4. Step 2. Sit the assembled front wall in position on top of the base. Using M01 (hex nuts) and S04 (t-head bolts) attach the two bottom corners of the wall to the L608-3764 lengths. Attach the bottom corners of the front wall (or back w…

25, L603-0585 W04A Roof assembly Step 8. Step 6. Step 9. Step 7. Attach the P03 (roof ridge plastic end caps x2) to each end of the L507-3784 (roof ridge) using the Z01 screws. Using the W04A’s brackets and the M01 (hex nuts) and S04 (T-head bolts) attach each end of the L603-0585 (cross rail) to…

5, Getting started Winter Gardenz Greenhouse Model No. PG0812H 5 About the locators When assembling the front and rear end walls of the Greenhouse, notice that you will be required to use the L507X roof angle locator and L509X wall angle locator. These are used for setting the correct spacin…

12, Front wall assembly Step 6. Step 4. Step 7. Step 5. Slide G02H (x2) panels into the aluminum frame channels. These should slide loosely into position and rest in the L606-0584. Attach L608-0644 (x2) between L601- 1507 and L603R/L-2000, using M01 & S04 nuts and t-head bolts. These …

2, Contents Contents Page 2 Introduction & getting started Page 3-5 • Introduction • Working space • Weather • Tools • Guarantee • About the glazing • About the T-head bolts • About the locators • If something doesn’t seem right • Spare parts Position…

11, Winter Gardenz PG0812H L619-2516 L603L-2000 Front wall assembly Step 1. Step 2. Step 3. PARTS LIST You will need: 2x L601-1507 (Wall upright) 2x L601-1542 (Wall roof) 1x L619-2516 (Door track) 1x L603D-1210 (Door frame) 1x L603R-2000 (Inner frame L) 1x L603L-2000 (Inner frame R) 2x L606-0584 (Support) 2x L608-0644 (…