Xpelair Natural Air 180 Vertical Installation Manual

4, Section 1 – Important notes 1.2.3 Start-up, use, interruption The completed installation must be tested to ensure the unit works correctly. The user must read the User manual in order to understand the procedures for use and maintenance. WARNING: The unit cont…

2, Installation Manual Contents Section 1 – Important notes 3 Section 5 – Setting up 21 1.1 Intended use 3 5.1 Requirements for the building 21 1.2 Safety instructions 3 5.2 Requirements for ventilation system 21 Section 2 – Description of the device 4 5.3…

19, Section 5 – Set up NOTE! A log of all the settings can be made using the Settings Log table in Section 10. WARNING: After completion, the system must not pose any safety, health or environmental hazards. The manufacturer cannot be held liable for any systems tha…

3, Section 10 – Settings Log table 10.2 Installer Settings Menu Title Setting Factory Default New Value Supply Speed 1 75 m 3 /hr Supply Speed 2 115 m 3 /hr Supply Speed 3 144 m 3 /hr Extract Speed 1 75 m 3 /hr Extract Speed 2 115 m 3 /hr Extract Speed 3 144 m 3 /hr Int…

7, Xpelair Natural Air 180 Vertical Section 8 – User Menu User menu continued on next page. 34 Section 2 – Description of the Device Fig. 2.3 Structure in detail 1 Rear cover 7 Control PCBs area 13 Control panel and display 2 Actuator cover 8 Filt…

5, Section 9 – Installer Menu 9 Map of the Installer menu Installer menu continued on next page. 36 Section 2 – Description of the Device Fig. 2.1 Supply-air/extract-air system with heat recovery 1 Fresh air* 6 Air diffuser NOTE! * Outside installation po…