Xilica Audio Design XP 4080 Operation & User’s Manual

15, Xilica Audio Design XP 4080 15 Navigate Front Panel Upon powering up the unit, the unit will start up and display the device model and firmware version. Once initialized, the device screen will display the current program number and program name assigned to the unit. If the program number ends with *, it mea…

2, 2 Important Safety Information 1. READ THESE INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. KEEP THESE INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED ALL WARNINGS Al…

11, 11 Cat5 Ethernet connection X Series IP Address can be configured on the front panel of the device or in the software. 1. On the front panel of the device, click the Enter button to enter the System menu. 2. Use the Menu arrows to navigate to the Ethernet menu. …

6, 6 XP 8080 MAINS: 90-240 VAC 50-60Hz, 20VA FUSE: T2.5A-250V I O Ethernet Control USE ONLY WITH 250V FUSE USB RS232 MENU CURSOR ENTER/SYS EXIT LIMIT -3dB -8dB -12dB SIGNAL MUTE MENU 1 2 3 4 5 6 7 81 2 3 4 5 6 7 8 OUTPUTS INPUTS 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 DSP Processor INP…

12, 12 Firmware Upgrade Please note that using an older version of software with a newer firmware or newer software with an older firmware will work but some of the features may not be available and bugs could exist. We recommend upgrading the software and firmware to the latest versions. …

18, 18 Input Graphic Equalizer GEQ# The graphic equalizer has 31 bands of equalization from 20Hz to 20kHz. This control selects one of the 31 available bands. The frequency corresponding to each band is also shown. LEVEL The GEQ level (or gain) ranges from -30dB to +15dB in 0.25dB steps. BYPA…