Multitel SDTA-02 Operation & User’s Manual

16, SDTA-02 INSTALLATION www.multitel.com [email protected] 15 J4 DEFINITION PIN NAME USE TYPE PIN NAME USE TYPE 1 VINA1 Phase A VAC input lead IN 5 VINB2 Phase B VAC common input lead IN 2 VINA2 Phase A VAC common input lead IN 6 N.C. Non connected N.A. …

10, Multitel SDTA-02 SDTA-02 OPERATION www.multitel.com [email protected] 9 Table 3 – SDTA-02 Setup PHASE JUMPER MXP2/MIRADOR RPM 1000/C Phase A JP5 OFF ON JP6 ON OFF JP9 ON OFF Phase B JP3 OFF ON JP4 ON OFF JP8 ON OFF Phase C JP1 OFF ON JP2 ON OFF …

5, www.multitel.com [email protected] 4 CONTROL SHEET ISSUE DATE DESCRIPTION ORIGINATOR 1.0 93/06/25 First English issue. Pierre Poulin 1.01 94/10/12 - - 1.02 97/05/08 Minor modifications and new formatting. François Dionne 1.1 00/06/16 New certification inform…

18, SDTA-02 MAINTENANCE www.multitel.com [email protected] 17 Table 4 – Diagnosis Path for Troubleshooting SYMPTOM POSSIBLE CAUSE No reading, the monitoring system displays 0 volts. 1) The MULTITEL monitoring system’s analog channel is disabled (refer to the…

15, SDTA-02 INSTALLATION www.multitel.com [email protected] 14 Figure 4 - Connector Definitions J1 DEFINITION PIN NAME USE TYPE PIN NAME USE TYP E 1 IOUTC2 Ammeter phase C common output lead OUT 5 IOUTB1 Ammeter phase B output lead OUT 2 IOUTC1 Ammeter phase C o…

2, 1 PROPRIETARY INFORMATION The information contained in this document is the property of MULTITEL INC. Except as specifically authorized in writing by MULTITEL INC., the holder of this document shall: 1. Keep all information contained herein…