Pentax ist DL Service Manual

48, 76570EM 47 22-5. WDC Adjustment procedure [NOTE] CCD white pixel defect compensation item only can be adjustable by this procedure. (1) Connect the AC adaptor to the camera. (2) Connect the camera to the computer by the USB cable (I-USB17). (3) Turn the main switch ON, and then con…

3, 76570EM 2 PREPARATION The following preparations are required before disassembling and assembling the camera. 1. Prepare the Jigs, tools and testers. (Refer to the Table of Jigs, tools and testers.) 2. Make the preparation for the digital adjustment. (Refer to the Preparation of digit…

32, 76570EM 31 10. 0-T600 ( CCD Block ) [Preparation] Attach the body mount cap to the camera to prevent damage of SI-LED. [CAUTION] Confirm there is neither dust nor scratches in the surface of CCD of T600. (1) Install 0-T600 to the main body while matching it to two positioning …

28, 76570EM 27 4. 0-Q200 (Flash PCB)/A5/A15 (1) 0-Q200/A5/A15 * Arrange the lead wire as shown figure right. (2) TY-CNL-D1.7x4.0 (3) CNL-D1.7x2.5 5. A6（Left shoulder plate） (1) A6 --- Pay attention the position of lead wires. (2) TY-CSM1.7x4.0 x 3 (3) TY-C…

67, Pentax ist DL 76570EM 66 ***** MAIN MENU ***** [ 4 ] NUMBER OF REPAIRS [ 6 ] BATTERY LEVEL [ 7 ] SHUTTER SPEED ADJUSTMENT ADJUSTMENT …

58, 76570EM 57 6M-CCD ASIC Millennia-3 Flash Memory LCD_Driver 6ch_DC/DC RTC 0.2F 3.3V 32.768k TG+AFE SD Connector CPU DPU EEPROM MotorDriver V-Driver H-Drv_Buffer 12M_3225 SDRAM0_512Mb 4M 32.768k T650 CCD-FPC NC NC VL（-8.0V） D_GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 �…