Phenomenex Presston 1000 AH1-7033 Operation & User’s Manual

9, Phenomenex Presston 1000 AH1-7033 9 Phenomenex l WEB: www.phenomenex.com Getting Started Refer to Figure 6 for images to help with the operation of Presston 1000 1. Ensure that the FLOW PATH SWITCHER is in the off position. 2. Turn on the gas and adjust the pressure from the GAS SOURCE to 0.5 MPa (72 psi) an…

5, 5 Phenomenex l WEB: www.phenomenex.com Gas Regulator with Filter (equipped with gas regulating valve and pressure gauge) Ensures that the maximum pressure capacity is not met Fig. 2 Overview of Back Inlet from Gas Source Gas Out to Manifold Shield Manifold Spacer Manifol…

6, 6 Instructions Phenomenex l WEB: www.phenomenex.com Need additional accessories? Contact your technical consultant for any requests. Accessories Screwdriver, Screws, and Gas Regulator Waste Collection Trough Manifold Spacer Small (2x) Manifold Spacer Large (1x) Tubing (6 mm) …

4, 4 Instructions Phenomenex l WEB: www.phenomenex.com Overview Easily streamline your 96-sample processing using Presston ™ 1000 Positive Pressure Manifold. Fig. 1 Overview of Front Locator Plate Holds manifold spacers, 96-well plate products and is moveable, for ease of tube or plate pr…

10, 10 Instructions Phenomenex l WEB: www.phenomenex.com Fig. 6 Operation Instructions for Presston 1000 Adjust the flow to either low pressure or high pressure depending on the step. Use both hands to move manifold shield up or down. Adjust the pressure regulator knobs to the desired p…