Phenix Technologies 600 SERIES Operation & User’s Manual

8, Phenix Technologies 600 SERIES 6CP100/50-10 3-2 CONTROLS AND INDICATORS Control Panel (Cont’d) 1. Reset Will light when Overcurrent trip setting is exceeded. Push to reset. Lamp must be extinguished for H.V. ON. 2. Emergency Off Push down to stop test immediately. Button must be pulled up to activ…

30, 6CP100/50-10 13-1 SECTION 13: PARTS ORDERING INFORMATION Replacement parts are available from Phenix Technologies, Inc. Changes to Phenix Technologies' products are sometimes made to accommodate improved components as they become available, and to give you the benefit of the lates…

24, 6CP100/50-10 9-1 SECTION 9: CHECKING OIL PURITY NOTE: Typical test data for the oil used by Phenix Technologies are provided at the end of this section. 1. The most reliable means of determining the purity of the oil in the field is to test the dielectric strength. Test sets f…

19, 6CP100/50-10 6-1 SECTION 6: CALIBRATION All calibrations have been done at the factory. Periodic calibration of the output voltmeter and output currentmeter should be done annually. NOTE: Refer to Electrical Diagram Section for schematics pertaining to the model number…

25, 6CP100/50-10 9-2 CHECKING OIL PURITY a. High Dielectric Strength: Transformer Oil has high electrical insulating values as shown by their dielectric strengths of over 30,000 volts. b. Excellent Oxidation Stability: Excellent oxidation stability and high resistance to sludging provid…